| 7228.10.00.60 |
Free |
The duty provided in the applicable subheading + 7.5% |
With a maximum cross-sectional dimension of 18 mm or more |
-- |
| 7228.20 |
|
|
Bars and rods, of silico-manganese steel: |
vs-7228100060 |
| 7228.20.10.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Not cold-formed |
vs-722820 |
| 7228.20.50.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Cold-formed
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: |
vs-7228201000 |
| 7228.30 |
|
|
Of tool steel (other than high-speed steel): |
vs-7228205000 |
| 7228.30.20.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of ball-bearing steel |
vs-722830 |
| 7228.30.40.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of chipper knife steel, not cold-formed |
vs-7228302000 |
| 7228.30.60.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other |
vs-7228304000 |
| 7228.30.80 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other |
vs-7228306000 |
| 7228.30.80.05 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of high-nickel alloy steel |
vs-72283080 |
| 7228.30.80.10 |
Free |
The duty provided in the applicable subheading + 7.5% |
Concrete reinforcing bars and rods
Other: |
vs-7228308005 |
| 7228.30.80.15 |
Free |
The duty provided in the applicable subheading + 7.5% |
With a diameter or cross section measuring less than 76 mm |
vs-7228308010 |
| 7228.30.80.41 |
Free |
The duty provided in the applicable subheading + 7.5% |
With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm |
vs-7228308015 |
| 7228.30.80.45 |
Free |
The duty provided in the applicable subheading + 7.5% |
With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm |
vs-7228308041 |
| 7228.30.80.70 |
Free |
The duty provided in the applicable subheading + 7.5% |
With a diameter or cross section exceeding 228 mm |
vs-7228308045 |
| 7228.40.00.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other bars and rods, not further worked than forged |
vs-7228308070 |
| 7228.50 |
|
|
Other bars and rods, not further worked than cold-formed or cold-finished: |
vs-7228400000 |
| 7228.50.10 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of tool steel (other than high-speed steel) |
vs-722850 |
| 7228.50.10.10 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of ball-bearing steel
Other:
With a maximum cross-sectional dimension of less than 18 mm: |
vs-72285010 |
| 7228.50.10.20 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of round or rectangular cross section with surfaces ground, milled or polished |
vs-7228501010 |
htshub©