| 9902.11.79 |
Free |
|
Strips wholly of expanded poly(tetrafluoroethylene) (PTFE) (CAS No. 9002-84-0), noncellular, with adhesive backing, of a thickness greater than 3 mm but not over 30 mm, presented rolled in spools, certified by the importer as having a tensile strength of 24.1 MPa (3,500 psi) or higher per American Society for Testing and Materials (ASTM) F-152 (provided for in subheading 3916.90.50)
|
-- |
| 9902.11.80 |
Free |
|
Insulated tubes of plastics, not reinforced, without fittings, presented in the form of hose, the foregoing tubes having polyethylene pipes inserted therein and suitable for use in hot water supply or heating systems (provided for in subheading 3917.32.00) |
vs-99021179 |
| 9902.11.81 |
Free |
|
Polyethylene micro-tubes, having an interior diameter of 0.01 mm and wall thickness of 0.05 mm (provided for in subheading 3917.32.00)
|
vs-99021180 |
| 9902.11.82 |
5.1% |
|
Plastic elbows, holding pins, bend supports, anchor clips, staples of a kind used in construction applications (provided for in subheading 3917.40.00) |
vs-99021181 |
| 9902.11.83 |
Free |
|
Transparent polypropylene coextruded flat film in rolls with a thickness between 162-198µm and a width between 396-398 mm (provided for in subheading 3920.20.00). |
vs-99021182 |
| 9902.11.84 |
3.5% |
|
Sheets of plastics of poly(methyl methacrylate), noncellular and not reinforced, laminated, supported or similarly combined with other materials, not flexible, the foregoing of a kind used to produce counter tops or edging, cabinet tops, faces or edges for home or office furnishings (provided for in subheading 3920.51.50) |
vs-99021183 |
| 9902.11.85 |
Free |
|
Flexible film of acrylic polymers, other than poly(methyl methacrylate) (provided for in subheading 3920.59.10) |
vs-99021184 |
| 9902.11.86 |
3.7% |
|
Poly(vinyl butyral) film (CAS No. 27360-07-2), certified by the importer to be used in aircraft (provided for in subheading 3920.91.00) |
vs-99021185 |
| 9902.11.87 |
Free |
|
Sheets of regenerated cellulose, cellular, nonadhesive, rectangular in shape and measuring 750 mm or more but not over 885 mm in length, 765 mm or more but not over 885 mm in width and 0.9 mm or more but not over 1.9 mm in thickness (provided in for subheading 3921.14.00) |
vs-99021186 |
| 9902.11.88 |
Free |
|
Expanded poly(tetrafluoroethylene) (PTFE) nonadhesive cellular sheets, of a thickness greater than 1.5 mm but not more than 3.0 mm, certified by the importer as having a tensile strength of at least 48.3 MPa (7,000 psi) per ASTM F-152 (CAS No. 9002-84-0) (provided for in subheading 3921.19.00) |
vs-99021187 |
| 9902.11.89 |
Free |
|
Expanded poly(tetrafluoroethylene) (PTFE) nonadhesive cellular sheets, of a thickness greater than 3.0 mm but not more than 6.0 mm, certified by the importer as having a tensile strength of at least 48.3 MPa (7,000 psi) per ASTM F-152 (CAS No. 9002-84-0) (provided for in subheading 3921.19.00) |
vs-99021188 |
| 9902.11.90 |
Free |
|
Injection molded thermoplastic dental restorative product containers, designed for use in a dispensing system, each container with capacity not over 50 ml (provided for in subheading 3923.30.00)
|
vs-99021189 |
| 9902.11.91 |
Free |
|
Plug-type closures of polyethylene, suitable for use in capping specimen tubes and measuring 15 mm in length; each closure having an upper portion designed to extend beyond the specimen tube to permit holding of the closure, such upper portion having a diameter of 15.5 mm and thickness of 3.3 mm and having a notched groove; with the bottom portion of such closure designed for insertion into a specimen tube having a diameter measuring approximately 11.7 mm; the foregoing closures certified by the importer as for use in an automated insertion system (provided for in subheading 3923.50.00) |
vs-99021190 |
| 9902.11.92 |
1.3% |
|
Injection molded thermoplastic dental restorative product dispenser closures fitting containers with capacity less than or equal to 50 ml (provided for in subheading 3923.50.00)
|
vs-99021191 |
| 9902.11.93 |
Free |
|
Plastic lids certified by the importer for use on food storage containers (provided for in 3923.50.00) |
vs-99021192 |
| 9902.11.94 |
0.5% |
|
Plastic cap for sport water bottle of the squeezable type (provided for in 3923.50.00) |
vs-99021193 |
| 9902.11.95 |
Free |
|
Cutlery of plastics, each piece individually wrapped in polypropylene film, presented with such wrapped cutlery joined together by skewers for ease of loading in a fully enclosed dispensing system (provided for in subheading 3924.10.40)
|
vs-99021194 |
| 9902.11.96 |
Free |
|
Cutlery of plastics, presented with quantities of identical cutlery items joined together by paper wrapping or paper banding designed for ease of loading in a fully enclosed dispensing system (provided for in subheading 3924.10.40)
|
vs-99021195 |
| 9902.11.97 |
Free |
|
Disposable cutlery of plastics, containing by weight over 96 percent of polypropylene, presented without being individually wrapped, grouped, banded or skewered for ease of loading in a fully enclosed dispensing system (provided for in subheading 3924.10.40) |
vs-99021196 |
| 9902.11.98 |
Free |
|
Pans or inserts of plastics, of a type designed for pet crates of metal wire as inserts to create a solid interior surface (provided for in subheading 3924.90.56) |
vs-99021197 |
htshub©