| 7306.40.50.62 |
Free |
The duty provided in the applicable subheading + 7.5% |
Containing more than 1.5 percent but less than 5 percent by weight of molybdenum |
-- |
| 7306.40.50.64 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other |
vs-7306405062 |
| 7306.40.50.80 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other
With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm: |
vs-7306405064 |
| 7306.40.50.85 |
Free |
The duty provided in the applicable subheading + 7.5% |
Containing more than 0.5 percent but less than 24 percent by weight of nickel |
vs-7306405080 |
| 7306.40.50.90 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other |
vs-7306405085 |
| 7306.50 |
|
|
Other, welded, of circular cross section, of other alloy steel: |
vs-7306405090 |
| 7306.50.10.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Having a wall thickness of less than 1.65 mm
Having a wall thickness of 1.65 mm or more: |
vs-730650 |
| 7306.50.30.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Tapered pipes and tubes of steel principally used as parts of illuminating articles |
vs-7306501000 |
| 7306.50.50 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other |
vs-7306503000 |
| 7306.50.50.10 |
Free |
The duty provided in the applicable subheading + 7.5% |
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn |
vs-73065050 |
| 7306.50.50.30 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other, cold-drawn or cold-rolled (cold- reduced)
Other: |
vs-7306505010 |
| 7306.50.50.50 |
Free |
The duty provided in the applicable subheading + 7.5% |
With an outside diameter not exceeding 114.3 mm |
vs-7306505030 |
| 7306.50.50.70 |
Free |
The duty provided in the applicable subheading + 7.5% |
With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
Other, welded, of noncircular cross section: |
vs-7306505050 |
| 7306.61 |
|
|
Of square or rectangular cross section:
Having a wall thickness of 4 mm or more: |
vs-7306505070 |
| 7306.61.10.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of iron or nonalloy steel |
vs-730661 |
| 7306.61.30.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of alloy steel
Having a wall thickness of less than 4 mm: |
vs-7306611000 |
| 7306.61.50.00 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of iron or nonalloy steel |
vs-7306613000 |
| 7306.61.70 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of alloy steel |
vs-7306615000 |
| 7306.61.70.30 |
Free |
The duty provided in the applicable subheading + 7.5% |
Of stainless steel |
vs-73066170 |
| 7306.61.70.60 |
Free |
The duty provided in the applicable subheading + 7.5% |
Other |
vs-7306617030 |
htshub©