| 2924.29.43.00 |
6.5% |
The duty provided in the applicable subheading + 25% |
3-Ethoxy carbonyl amino phenyl-N-phenyl carbamate (Desmedipham); and Isopropyl-N-(3-chlorophenyl) car-bamate (CIPC) |
-- |
| 4013.10.00.10 |
3.7% |
The duty provided in the applicable subheading + 25% |
Motor car |
vs-2924294300 |
| 9902.07.62 |
Free |
|
Methyl 2-[[[[[(4,6-dimethoxypyrimidin-2-yl)amino]car- bonyl]amino]sulfony]methyl]benzoate (Bensulfuron-methyl) (CAS No. 83055-99-6) (provided for in subheading 2935.90.75) |
vs-4013100010 |
| 9902.12.12 |
Free |
|
Mounts of plastics, designed to secure cameras of subheading 8525.80.40 to a person's head; each mount incorporating an adjustable head-strap designed to encircle the forehead, a strap designed to cross the top of the user's head, a plastic mount designed to clip the camera to the head strap, a thumbscrew to allow the mounting of the camera and the adjustment of the viewing direction of the camera on a pivot (provided for in subheading 3926.90.99)
|
vs-99020762 |
| 9902.12.15 |
Free |
|
Camera mounts of plastics, designed to clamp to tubes measuring 10 to 23 mm, each mount designed to hold two cameras in such positions as to permit the user to take photos with immersive front-facing and rear-facing perspectives (provided for in subheading 3926.90.99)
|
vs-99021212 |
| 9902.12.23 |
Free |
|
Camera mounts of plastics, designed to hold cameras of subheading 8525.80.40, each mount measuring 4 and 10 cm in length, 3 to 5 cm in width and less than 2 cm in height, incorporating adhesive pads to attach the mount to flat surfaces (provided for in subheading 3926.90.99)
|
vs-99021215 |
| 9902.12.26 |
Free |
|
Camera mounts of plastics, each with an elongated, segmented plastic neck composed of 6 to 8 ball joints, incorporating a base that clips into other types of mounts but not incorporating a clamp, engineered to mount cameras of subheading 8525.80.40 (provided for in subheading 3926.90.99).
|
vs-99021223 |
| 9902.12.51 |
Free |
|
Camera cases of transparent polycarbonate plastics, designed to encase cameras of subheading 8525.80.40; each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m, a flat and optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90). |
vs-99021226 |
| 9902.12.54 |
Free |
|
Camera cases with outer surface of transparent molded polycarbonate plastics, designed for cameras of subheading 8525.80.40; the foregoing each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of not more than 40 m, a flat, optically-coated, glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90) |
vs-99021251 |
| 9902.12.55 |
Free |
|
Camera cases of molded polycarbonate plastics, such cases designed to hold cameras of subheading 8525.80.40, each case incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount that allows adjustment of the viewing angle on a pivot, a flat and optically-coated glass lens and open spaces that allow air and sound to enter (provided for in subheading 4202.99.90). |
vs-99021254 |
| 9902.12.56 |
Free |
|
Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90). |
vs-99021255 |
| 9902.15.36 |
Free |
|
Manual door closers of base metal, suitable for use on buildings, such closers with adjustable latch speed tension to suit individual needs; designed with side mount activation button which reduces user damage during activation (provided for in subheading 8302.41.30) |
vs-99021256 |
| 9902.16.09 |
2.0% |
|
AC electric motors of an output exceeding 37.5w but not exceeding 72w, single phase, each equipped with a capacitor, a speed control mechanism, and a motor mount of plastics and a self-contained gear mechanism for oscillation (provided for in subheading 8501.40.20). |
vs-99021536 |
| 9902.16.18 |
Free |
|
Power adapters designed for use with standard car cigarette lighter sockets having dual USB output ports with 12 W output per port (provided for in subheading 8504.40.95) |
vs-99021609 |
| 9902.17.13 |
Free |
|
One-piece baby strollers, each with non-detachable seat; with foldable, non-removable anchor points designed for car seat mounting and a folding mechanism designed to allow the backrest to collapse forward against the stroller seat (provided for in heading 8715.00.00) |
vs-99021618 |
htshub©